P2673
Injection Pump Timing Calibration Not Learned
This code says the engine controller holds no valid learned value for the start of delivery of its injection pump. Such a value is usually taught after the pump or the controller is replaced, or after a software reflash, and lets the controller correct the pump's individual timing tolerance. The same Dodge campaign (T21, new engine software for 2004–2006 Sprinter vans) also lists P2673 beside P2672; no public maker document explains its logic. CARB asks for tolerance compensation to be monitored on parts that are matched to the controller. Unlike P2672 the timing itself need not be wrong; the learning step is simply missing. A relearn with a scan tool is the usual cure.
Possible causes
- Timing relearn skipped after pump or controller replacement high
- Software update interrupted or learned values lost medium
- Relearn aborted because enable conditions (temperature, voltage) were not met low
Symptoms
- Check engine light on
- Slightly rough running or more noise
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2673
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.