P2672
Injection Pump Timing Offset
On diesels with an electronically controlled rotary or distributor pump, the controller needs to know how far the pump's actual delivery start sits from its nominal position relative to the crankshaft. P2672 flags that this stored or measured offset is wrong or outside the window the software accepts. CARB requires 2010-on diesels to detect injection that is too early or too late. Dodge listed P2672 among the codes activated by the engine-controller update in emissions recall T21 for the 2004–2006 Sprinter; no public maker text gives a threshold. P2673 instead means the timing value was never learned. A driver may notice hard starting, knocking, smoke or reduced power.
Possible causes
- Injection pump fitted or re-timed incorrectly after repair high
- Faulty pump timing or crank/cam reference signal medium
- Worn pump drive (gear, belt, coupling) shifting the timing low
- Engine control software fault or wrong calibration low
Symptoms
- Check engine light on
- Hard starting or rough idle
- Diesel knock, smoke or reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2672
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.