OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P266E

"A" Rocker Arm Actuator Position Sensor Circuit Intermittent/Erratic (Bank 2)

P266E describes a bank 2 position signal from actuator A that flickers: brief dropouts or spikes appear while the reading is otherwise fine. Heat cycling near the exhaust side, vibration on a loose pin or a harness rubbing on a bracket can produce it, and it often comes and goes. No manufacturer documents P266E publicly. CARB expects lift system inputs to be checked for continuity and rationality, which includes such short interruptions. A jumping signal makes the lift control on bank 2 unsteady or forces it to a default position, felt as hesitation or uneven running. Logging the sensor value while flexing the harness on that bank is the usual way to catch it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 6E

Possible causes

  • Connector contact degraded by heat cycling near the exhaust medium
  • Loose pin vibrating in the bank 2 sensor plug high
  • Harness rubbing on a bracket medium

Symptoms

  • MIL comes and goes
  • Hesitation or uneven running
  • Fault often not present at the workshop

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P266E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication