OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P266B

"A" Rocker Arm Actuator Position Sensor Circuit Range/Performance (Bank 2)

For bank 2, P266B means the position reported for actuator A is electrically valid but does not match what was commanded or changes too slowly. CARB expects variable lift monitors to notice when the commanded position is missed or reached too late, and a sensor whose reading drifts from the real actuator position defeats both. No manufacturer publishes P266B; on the bank 1 side Toyota's comparable experience with P265B on Valvematic engines ended in recalibration or a replaced lift controller, which illustrates that software and mechanics can both be at fault. Check sensor mounting, linkage wear and actuator movement on that bank before replacing parts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 6B

Possible causes

  • Bank 2 actuator or linkage binding medium
  • Sensor reading drifting from the true position medium
  • Control software calling for an update low

Symptoms

  • MIL on after a drive cycle
  • Uneven running between the banks
  • Hesitation under load

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P266B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication