OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2669

Actuator Supply Voltage B Circuit/Open

Many transmission controllers feed their solenoids through internal high-side switches, called actuator supply A and B. Ford's 6R140 splits its Transmission Solenoid Power Control into two wires: TSPC-A powers shift solenoids A, C and E (fault P0657), TSPC-B powers SSB, SSD, TCC and line pressure control (P2669). Because both share one internal switch, any fault switches off all seven solenoids, leaving park, reverse, neutral and 5th gear with full line pressure; Ford lists P2669 with MIL. In GM's 16OBDG08 tables for Silverado/Sierra the TCM flags an open supply 2 when several solenoids on it read open at once while the supply line stays high; GM's 2023 TCM test checks at power-down and logs it as Type A. P2670 and P2671 cover low and high faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 69

Possible causes

  • Open supply wire or connector between module and transmission bulkhead high
  • Damaged internal transmission harness or lead frame medium
  • High-side switch inside the controller failed low

Symptoms

  • Transmission stuck in a fixed gear (failsafe)
  • Harsh engagements due to maximum line pressure
  • MIL or transmission warning on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2669

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication