P2668
Fuel Mode Indicator Lamp Control Circuit
Bi-fuel vehicles tell the driver which fuel is in use through a small indicator, often built into the fuel selector button. On GM's 2016 Silverado and Sierra with CNG the light is off on gasoline, steady on natural gas, flashes once per second during a changeover and flashes about ten times per second when the CNG system has a fault; the 2015 Impala Bi-Fuel uses a similar light in its CNG switch. P2668 indicates that the module driving this lamp has found a fault in its control circuit, such as an open wire or a failed bulb or LED. No manufacturer documents the code publicly. Fuel switching itself is unaffected, but the driver loses the fuel mode display and the error warning. P26E2 and P26E3 are the low and high variants.
Possible causes
- Indicator LED or bulb in the selector switch failed high
- Open wire or loose connector at the switch medium
- Lamp driver in the control module defective low
Symptoms
- Fuel mode lamp stays dark in gas mode
- No flashing during fuel changeover or on errors
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2668
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.