OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2665

Fuel Shutoff Valve B Control Circuit/Open

Engines that can burn a second fuel such as compressed natural gas use electric shut-off valves to keep that fuel locked in when it is not wanted. GM's 2015 Impala Bi-Fuel has two of them, both normally closed: a high-pressure cut-off at the tank and a low-pressure cut-off at the regulator, which the ECM energises only in CNG mode while the engine cranks or runs. P2665 means the control circuit of shut-off valve B is open, so the module cannot energise that valve. Ford's 2014 spark-ignition code list includes P2665 as a continuous test without MIL. Which physical valve carries the letter B is not published by either maker. With the valve unpowered, the gaseous fuel stays shut off and the engine typically falls back to gasoline. P0005 is the same fault on valve A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 65

Possible causes

  • Open valve coil high
  • Loose or corroded connector at the valve (often exposed under the vehicle) medium
  • Broken wire in the control circuit medium

Symptoms

  • Engine runs only on gasoline, gas mode not available
  • Fuel mode lamp flashes or shows an error

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2665

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication