P2662
"B" Rocker Arm Actuator System Stuck On (Bank 2)
With P2662 the controller concludes that stage B on bank 2 stays switched after it has requested the default mode. Detection depends on the design: a pressure switch that keeps indicating oil pressure, or engine behaviour on that bank that still matches the engaged state. A solenoid that seeps oil when closed, a return path that cannot drain, or locking pins jammed by debris or wear keep the rockers coupled. Because only one bank is affected, the engine may idle unevenly or misfire on that side, especially when cold. No manufacturer documents P2662 publicly; Honda's published stuck-on case for stage B (P2652) refers to bank 1. CARB requires such stuck conditions in valve lift systems to be detected. Opposite fault on this bank: P2661.
Possible causes
- Bank 2 solenoid B seeping oil when closed high
- Blocked drain path keeping oil pressure on the rockers medium
- Locking pins jammed in the coupled position by debris or wear medium
Symptoms
- MIL on
- Uneven idle or misfire on bank 2, worse when cold
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2662
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.