OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2660

"B" Rocker Arm Actuator Control Circuit/Open (Bank 2)

P2660 concerns V-type or boxer engines with switchable rocker arms on both cylinder banks: the controller sees the drive circuit of solenoid B on bank 2, the side without cylinder 1, as broken. An open coil, a disconnected plug after valve cover work, or a cut wire leaves the output without load, so the command and the electrical feedback disagree. No manufacturer documents P2660 publicly, and the Honda V6 cases on record involve bank 1 only. GM's 2015 table 15OBDG05 illustrates the method on actuator A with a driver check from 11 V upward and 100 failures in 120 samples. CARB requires circuit monitoring on every lift system output. The bank 1 equivalent is P2650; shorts on this line are P2663 and P2664.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 60

Possible causes

  • Solenoid B plug on bank 2 left unplugged or not latched after repairs high
  • Open coil in bank 2 solenoid B medium
  • Cut or broken wire on the bank 2 harness branch medium

Symptoms

  • MIL on
  • Bank 2 B stage inactive, uneven running between banks possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2660

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication