P265F
Variable A/C Compressor Control Circuit Range/Performance
Variable-displacement A/C compressors change their output through an electric control valve on the back of the compressor housing. On Ford's externally controlled design the PCM drives that valve with a pulse-width signal and aims for an evaporator temperature of roughly 3 to 8 °C; Volkswagen calls the part regulator valve N280, a coil of around 10 ohms. P265F stands for a control circuit that is electrically intact but behaves implausibly, for example a measured valve current that does not follow the commanded duty cycle, or pressures that do not react. No manufacturer documents P265F publicly; Ford lists only the circuit codes P06A0 to P06A2, which this code complements. Expect weak or fluctuating cooling. Engine operation and emissions are usually unaffected.
Possible causes
- Control valve sticking or internally worn high
- Refrigerant charge too low, so pressures do not follow the valve command medium
- Corroded connector or high resistance in the valve circuit medium
- A/C pressure sensor reading wrong low
Symptoms
- A/C cools weakly or inconsistently
- Compressor runs at fixed or minimum output
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P265F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.