OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2654

"B" Rocker Arm Actuator Control Circuit High (Bank 1)

P2654 reports a voltage that is too high on the wire that drives rocker solenoid B, bank 1, typically when the line touches a battery-fed wire or the driver's ground side is bridged. With a ground-switched solenoid, that kind of short can energise the valve permanently, so the B stage may stay engaged regardless of the command, which the engine feels as rough idle or misfire at low speed. No carmaker publishes this code with details. GM checks the matching A circuit (P2649) on its 2015 four-cylinders using an output test that needs at least 11 V and declares a Type A fault once 100 of 120 checks fail. CARB counts a short to power among the circuit faults a lift system must catch. Related: P2653 for the low side, P2650 for an open circuit, P2664 on bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 54

Possible causes

  • Solenoid B control wire shorted to a battery-fed circuit high
  • Internal short in solenoid B lowering its resistance medium
  • Shorted output transistor in the engine control module low

Symptoms

  • MIL on
  • Rough idle or misfire if the B stage stays engaged
  • Possible blown fuse on the solenoid supply

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2654

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication