OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2652

"B" Rocker Arm Actuator System Stuck On (Bank 1)

P2652 means the controller thinks stage B of the bank 1 rocker switching stays engaged after release was commanded, usually because the confirming oil pressure switch still signals pressure. Honda documents it in two ways. For the 2017 Odyssey, Pilot and Ridgeline and the 2017 Acura MDX, RDX, RLX and TLX, Honda dealer messages from 2021–22 describe it as a stuck-on fault of rocker arm oil pressure switch B on bank 1, often stored together with P3400 for the cylinder-pausing Valve Pause System; owners may notice uneven running, and Honda asked dealers to hold such cars for inspection. Bulletin 13-021 for older four-cylinder i-VTEC models instead treats P2647/P2652 as a high-voltage fault in the switch circuit. A solenoid leaking oil while off also fits.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 52

Possible causes

  • Rocker arm oil pressure switch B reporting pressure permanently high
  • Solenoid B lets oil through in its closed position medium
  • Locking pin stuck in the engaged position medium
  • Switch signal line shorted to voltage (Honda four-cylinder meaning) low

Symptoms

  • MIL on, possibly together with P3400 on Honda V6
  • Rough or uneven running, especially at low load
  • Cylinder deactivation no longer works

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2652

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication