P2651
"B" Rocker Arm Actuator System Performance/Stuck Off (Bank 1)
In the generic definition, P2651 says the B stage of rocker arm switching on bank 1 did not engage when requested, or engaged too weakly to be confirmed. Controllers usually verify the change through an oil pressure switch in the rocker gallery or through a measurable shift in engine behaviour. Honda gives the number a narrower meaning on many four-cylinder i-VTEC engines: Service Bulletin 13-021 (Accord L4 2003–12, CR-V 2002–09, Element 2003–11, Fit 2007–11, CR-Z 2011, Civic Si 2002–05 and Civic 2012–13) files P2646 or P2651 as a low-voltage fault in the rocker arm oil pressure switch circuit, may be intermittent, and the fix is a new switch. For the generic case, low or thin oil, a blocked solenoid screen and a seized locking pin are typical. P2652 is the opposite state.
Possible causes
- Intermittently failing rocker arm oil pressure switch (Honda i-VTEC) high
- Oil level too low or oil of the wrong grade medium
- Clogged filter screen or sticking spool in solenoid B medium
- Locking pin in the switchable rocker arm seized by deposits low
Symptoms
- MIL on, sometimes only now and then
- Engine lacks pull in the speed range served by stage B
- Fault may not return right after clearing
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2651
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.