P264F
Engine Serial Number Not Programmed or Incompatible
Some engine controllers store the serial number of the engine they belong to, much like the VIN. P264F is logged when that entry is empty or does not fit. Ford Special Service Message 47823 covers 2013 to 2019 E-Series, Super Duty, F-53/F-59 and F-650/750 models: after a PCM replacement the MIL comes on with P264F until the engine serial number, taken from the build records in OASIS, is written into the new PCM with the Ford scan tool. Ford's 2023 diesel OBD summary groups the code with P0630 under vehicle configuration, and Ford's 2014 gasoline list marks it with MIL. GM's 2024 heavy-duty ECM tables set it when any stored serial digit still reads 0xFF, checked continuously, Type A after one trip. It is a configuration fault, not mechanical damage.
Possible causes
- Engine serial number not written after PCM/ECM replacement high
- Serial number from another engine or used control module medium
- Stored configuration lost through a memory fault in the module low
Symptoms
- MIL on after control module replacement
- Usually no change in how the engine runs
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P264F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.