OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2636

Fuel Pump B Low Flow/Performance

P2636 is the flow check for fuel pump B, in practice mostly the transfer pump of trucks with two tanks. GM's 2014 table for the 6.6 L LML compares how fast the levels in both tanks fall while the pump runs; if they do not move as expected for 140 s, a Type B fault is stored. The 2020 diesel table weighs a commanded transfer of 5 litres against the level change in the main tank (limit 2.5 litres, 1,000 s), or flags a rear tank still holding over 141 litres after 1,150 s of pumping; both give Type C. Emission recall 17067 for 2015-2016 Silverado/Sierra HD LML with tanks N2N notes that the MIL comes on, the fuel gauge drops to empty and transfer is blocked; dealers re-plumb the lines and reflash the ECM. PIT5208A attributes a false P2636 to refuelling with the engine or ignition on.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 36

Possible causes

  • Weak transfer pump not moving enough fuel between tanks high
  • Restricted transfer line or design-related flow limit (GM recall 17067) medium
  • Refuelling with engine or ignition on confuses the level-based check medium
  • Faulty fuel level sender in one of the tanks low

Symptoms

  • Fuel gauge shows empty although the second tank holds fuel
  • Engine may stall when the main tank runs dry
  • Malfunction indicator lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2636

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication