OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2632

Fuel Pump B Control Circuit/Open

Fuel pump B is a second pump beside the main one: a transfer pump between two tanks, an in-line booster or a second in-tank pump. P2632 reports an open in its control circuit. On the 6.6 L LML Duramax with dual tanks, GM's 2014 table 14OBDG10 drives the transfer pump relay through a low-side driver and sets the code as Type B after 3 s above 200 kOhm. In the 2020 diesel table 20OBDG04 it is a Type C code without MIL after 20 of 25 samples. Bulletin PIT5212B on 2013 Silverado/Sierra 3500 chassis cabs asks for a scan tool update before diagnosis. VW sets it below 0.8 mA for the in-line pump of 2014 Golf and Beetle; Ford's 2020-2023 summary uses P2632 for driver feedback faults of pump module B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 32

Possible causes

  • Failed transfer pump relay, fuse or relay socket high
  • Open wire or corroded connector at the pump or tank medium
  • Pump motor or pump driver module open internally medium
  • Outdated scan tool cannot command the pump (GM PIT5212B) low

Symptoms

  • Fuel from the second tank is not transferred, gauge drops faster
  • Possible stalling when the main tank runs dry
  • Warning lamp depending on manufacturer

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2632

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication