P2624
Injector Control Pressure Regulator Circuit Low
P2624 is reserved for a control circuit of the injection pressure regulator that sits too low, typically a ground short on the line switched by the PCM. No manufacturer documents this code publicly. On the 6.0 L Power Stroke, the best-known HEUI application, Ford reports every open or short of the IPR driver under P2623 alone, according to its OBD summaries up to 2009; International's HEUI engines like the DT466 use their own heavy-duty fault codes. CARB requires engines whose injection pressure is built hydraulically to have that pressure control monitored like a fuel system. A grounded IPR output can leave the valve permanently energised, so oil rail pressure may run high or the module shuts the output down. P2623 is the open circuit, P2625 the high fault.
Possible causes
- IPR control wire chafed to ground near the valley or pump cover high
- Internally shorted IPR coil medium
- Damaged driver stage in the PCM low
Symptoms
- Hard start or no-start
- Rough running, knocking or erratic power
- Malfunction indicator lamp on
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2624
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.