OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2611

A/C Refrigerant Distribution Valve A Control Circuit/Open

A refrigerant distribution valve is an electrically switched valve in the A/C circuit that opens or blocks the refrigerant path to one branch, for example a rear evaporator or a battery chiller. P2611 tells you the engine or powertrain module can no longer drive valve A because its control line or coil is open. Ford's 2014 PCM code list for spark-ignition engines includes P2611, testable with key on, engine running and in continuous mode, but without a MIL mark. Audi uses the same valve naming in its thermal management module (valve B, P0EE2, A7 plug-in hybrid). P2612 and P2613 are the low and high faults of the same circuit. Typically the affected A/C branch stays shut or open, so cooling in one zone or of the battery suffers; engine operation is not affected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 11

Possible causes

  • Valve solenoid coil burnt out or internally open high
  • Corroded or loose connector at the valve, often near condensation medium
  • Broken control wire between module and valve medium
  • Faulty output stage in the controlling module low

Symptoms

  • One A/C zone (e.g. rear) blows warm or cannot be shut off
  • Reduced battery cooling on hybrids or EVs, possibly limited charging power
  • Stored code, often without warning lamp

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2611

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication