OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P260D

PTO Engaged Lamp Control Circuit

P260D concerns the output that drives the lamp or LED telling the operator that the power take-off is engaged; the module has found a fault in that lamp circuit. For GM's heavy-duty pickup chassis cabs, upfitter bulletin UI 80c explains how such an indicator behaves: the LED in the PTO switch blinks quickly while the relay is energized, turns steady once load feedback confirms engagement or after 3 s without feedback, and blinks slowly when a memory speed is stored. A remote PTO indicator can be wired as well. GM's PTO code table does not list P260D, and no other maker documents it publicly. The PTO itself may work normally, but the operator loses the visual confirmation, which matters for safe work with tippers, cranes or pumps. P260A to P260C cover the control circuit itself.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 0D

Possible causes

  • Failed indicator lamp or LED high
  • Open or shorted wire to the indicator, often in add-on wiring medium
  • Fault in the PTO switch assembly with integrated LED low

Symptoms

  • PTO indicator stays dark or lit regardless of PTO state
  • PTO itself works normally

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P260D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication