P2606
Intake Air Heater B Circuit Range/Performance
P2606 means heater B in the intake does respond, but the current it draws or the voltage drop across its circuit lies outside the window the engine controller expects. Mack documents P2604-7F and P2606-7F for 2014-2017 trucks with MP7, MP8 and MP10 engines and puts them down to extra circuit resistance from corrosion inside the master disconnect switch, so inspecting those contacts comes first. Volvo's 2020 software change log for heavy-truck engines lists P2606-7F next to the heater A code as a result of the preheater relay issue addressed by new EMS software. Unlike P2605, P2607 and P2608, the circuit is not open or shorted but merely implausible; P2604 is the same check for heater A. Cold starts may become sluggish and the engine may smoke white until warm.
Possible causes
- Extra resistance from corroded contacts, e.g. in the master disconnect switch high
- Worn preheat relay contacts medium
- Aged heater element with changed resistance medium
- Outdated engine software (update published by the maker) low
Symptoms
- Sluggish cold starts
- White smoke until the engine is warm
- MIL on
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2606
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.