OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2603

Coolant Pump A Control Circuit High

P2603 means the drive line of electric coolant pump A reads high - usually a short to the supply side, or an overcurrent seen by the driver stage. Ford's 2020-2023 gasoline OBD summary assigns pump A to the auxiliary high-temperature loop for cabin heating and sets P2602/P2603 when the smart driver reports a fault within 5 s. For the 3.6 L LLT, GM's 2008 table checks the after-run pump for a circuit fault to voltage (pending code only, no warning light). VW's 2014 books use a current threshold: about 0.60-1.20 A on the Passat and CC, 5.5-10 A on the Touareg. Under CARB, output components need monitoring for circuit faults. P2600 is the open circuit, P2601 performance, P2602 the low-side fault. Heater output or after-run cooling may be lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 03

Possible causes

  • Control wire shorted to battery voltage high
  • Seized or sluggish pump drawing excessive current medium
  • Faulty driver stage in the ECM low

Symptoms

  • Fault code stored; MIL depends on the maker (GM 2008 LLT table none, GM 2023 ECM table Type B)
  • Weak cabin heating
  • Higher coolant temperature after hot shutdown

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2603

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication