OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2601

Coolant Pump A Control Circuit Performance/Stuck Off

P2601 is set when electric coolant pump A is commanded on, yet its feedback or its effect shows that it is not really working, while the wiring itself tests sound. GM's 2008 table for the 3.6 L LLT judges its auxiliary pump indirectly: after a shutdown with coolant above 110 °C the pump runs on, and if the coolant does not cool down as the ambient-dependent calibration expects within about 80 s, the code is logged. Ford reprograms the PCM of 2021 F-150 trucks with the 3.5 L PowerBoost hybrid under bulletin 21-2053 for P2601 together with other codes. FCA lists P2601-00 for the electric coolant pump of the 2024 Dodge Hornet plug-in hybrid and cures it with control-module software. P2600, P2602 and P2603 report the electrical faults. Heating or post-shutdown cooling may suffer.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 01

Possible causes

  • Electric pump seized, worn or running too slowly high
  • Control module software misjudging the pump (update available) medium
  • Air pocket or low coolant so the pump runs dry medium

Symptoms

  • MIL on
  • Weak cabin heating
  • Coolant temperature stays high after shutdown

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2601

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication