OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2600

Coolant Pump A Control Circuit/Open

P2600 means the controller sees an open circuit on the line that drives electric coolant pump A, directly or through its relay. GM's 2023 ECM table tests the auxiliary coolant pump relay output while it is off: more than 200 kOhm for 5 of 6 seconds sets the code as Type B, so the MIL follows after two trips. On Ford's 2020-2023 gasoline engines pump A serves the cabin heating loop. Hyundai traces P2600 on 2016-2019 Sonata Hybrid and Plug-in Hybrid to an internal open or short in the electric engine water pump or to low coolant; Kia found water seeping into the housing of the auxiliary pump on early 2019 Niro hybrids, and Audi chafed gearbox wiring on 2023 A6/S6. P2602 and P2603 are the low and high faults, P2601 the function check.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number6 / 00

Possible causes

  • Internal open circuit in the electric pump or its electronics high
  • Water or coolant ingress causing poor contact at the pump medium
  • Chafed or broken control wire, loose connector or failed relay medium
  • Coolant level too low (named by Hyundai as possible trigger) low

Symptoms

  • MIL or hybrid warning lamp on
  • Little or no cabin heat
  • Rising coolant temperature in hybrid or after-run operation

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2600

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication