OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P25EE

Vacuum Pump Control Circuit B/Open

P25EE covers the second control circuit of an electric brake vacuum pump, the part of the wiring that should carry voltage while the pump is switched on. Ford's 2019 OBD summary for its hybrid and plug-in models assigns P25EE to the brake system module, mapped from that module's own code C1036: with the pump relay commanded closed, a monitoring line voltage below 250 mV for one second means the pump is not getting its supply, typically from an open circuit, a failed relay contact or a blown fuse. Circuit A (P258A) is judged with the relay open instead. On these vehicles the pump keeps the brake booster supplied when the combustion engine is shut down. P25EF to P25F1 are the performance, low and high codes of the same circuit. CARB treats such electrical outputs as comprehensive components. The pedal can turn hard.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / EE

Possible causes

  • Blown vacuum pump fuse high
  • Pump relay contact not closing medium
  • Broken wire or loose connector between relay and pump medium

Symptoms

  • Hard brake pedal, especially with the engine off or in electric drive
  • Brake or traction warning lamp in addition to the check engine lamp
  • Vacuum pump never heard running

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P25EE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication