P25E6
"B" Camshaft Position - Stuck In Locked Position (Bank 2)
P25E6 tells that on bank 2 the exhaust cam phaser has not left its locked angle despite a command to adjust. The module then has one exhaust camshaft that can no longer be phased, which shifts valve overlap on that bank and can upset idle quality and the emissions balance between the two banks. Ford's 2014 list for the Boss 302S V8 includes P25E6 as a lamp code, together with the matching intake and bank 1 codes. The root causes resemble those of the other stuck-lock codes but should be checked on the bank 2 side specifically: oil feed and screen to that head, the bank 2 exhaust control valve and the phaser itself. CARB obliges OBD systems to flag VVT systems that do not reach their target angle. Expect the warning lamp, reduced power and possibly a rattle from the timing drive.
Possible causes
- Restricted oil feed or clogged screen to the bank 2 cylinder head high
- Bank 2 exhaust oil control valve stuck medium
- Lock pin seized in the bank 2 exhaust phaser low
Symptoms
- Check engine lamp on
- Reduced power, uneven idle
- Rattle from the timing drive
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P25E6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.