OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P25E2

"A" Camshaft Position Control Performance (Bank 2)

P25E2 points to poor position control of the bank 2 intake camshaft actuator: the measured angle tracks its target less accurately or with more oscillation than the calibration allows, while no clear lock fault is present. It is the bank 2 sibling of P25DF. No manufacturer publishes its trigger, so it remains unclear how it is separated from P0021 (bank 2 over-advanced or system performance) or the slow response code P000C; when one of those is stored too, it usually guides the diagnosis. CARB 13 CCR 1968.2 wants every VVT system checked for missed setpoints and for being too slow. In hydraulic phasers of the mid-lock type, as BorgWarner supplies for the Hyundai Gamma II, contaminated oil, a weak solenoid valve or internal leakage reduce control precision. Symptoms tend to be mild: unsteady idle and lower efficiency.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / E2

Possible causes

  • Bank 2 intake solenoid valve worn or sluggish high
  • Contaminated or overdue engine oil medium
  • Internal leakage across the phaser vanes low

Symptoms

  • Check engine lamp on
  • Slightly unsteady idle
  • Lower fuel economy

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P25E2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication