OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P25DC

Fuel Level Sensor C Stuck

P25DC is set when a third fuel level sender, sender C, keeps returning the same reading although the engine has consumed a meaningful amount of fuel. Such a third input exists only on vehicles with extra or divided tanks, for example saddle tanks or auxiliary tanks on trucks. No manufacturer documents P25DC publicly. Ford's 2020–2023 gasoline OBD summary describes the equivalent check for senders A and B (P25B0 to P25B2): the PCM adds up injected fuel as a share of tank capacity and compares it with the sender movement, allowing a 25 to 60 % mismatch depending on where the reading is frozen. CARB requires a rationality check for a stuck fuel level sensor, since the level also enables the evaporative leak test. Electrical faults on sender C have their own codes, P25D7 and P25D9 to P25DB. The gauge or range display stops moving.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / DC

Possible causes

  • Float arm of sender C caught on a baffle, pump bracket or tank wall high
  • Worn spot on the sender C resistor track holding the wiper at one value medium
  • Fuel transfer to or from tank C not working, so its level really does not change medium

Symptoms

  • Fuel gauge or range display frozen over a long distance
  • Risk of running out of fuel despite a displayed reserve
  • Check engine lamp on

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P25DC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication