P25D8
Fuel Level Sensor C Performance
P25D8 says that the third fuel level input delivers an electrically valid signal whose behaviour is not believable: it jumps, drifts or disagrees with the fuel actually used or transferred. A sender frozen at one value has its own code, P25DC, so P25D8 covers the remaining plausibility faults. No manufacturer documents P25D8 publicly. Comparable checks exist for the second sender: Ford treats more than 100 changes of over 40 % between samples taken every 0.1 s as a noisy signal (P2066), and GM's 2020 dual-tank logic checks whether the secondary sender reacts when its transfer pump moves fuel. A C-side check would likely follow similar ideas. CARB requires such rationality monitoring for fuel level inputs. The driver may see an erratic gauge or a range estimate that makes no sense.
Possible causes
- Worn or dirty resistor track in sender C giving jumps high
- Transfer pump or line fault so the level in tank C does not change as expected medium
- Damaged or loose float on sender C low
Symptoms
- Fuel gauge jumps or shows unrealistic values
- Range estimate inconsistent
- Check engine lamp on after repeated detection
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P25D8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.