OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P25D3

Exhaust Camshaft Actuator Park Lock Control Circuit/Open (Bank 2)

P25D3 concerns engines with two cylinder banks and a lockable exhaust phaser on each: the lock solenoid circuit of the bank 2 exhaust phaser is open or electrically implausible, so the module loses control over its pin. On many V engines the bank 2 exhaust solenoid sits at the rear or close to the firewall, where connectors are easily left loose after timing work. A loose plug sets only this code, whereas an open in a shared supply would usually trigger lock codes on several phasers at once. No manufacturer documents P25D3 in public material; the text is based on CARB's variable valve timing and output monitoring rules and on how locking phasers operate. The engine keeps running, but with fixed exhaust timing on bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / D3

Possible causes

  • Bank 2 exhaust lock connector left loose after timing work high
  • Open winding in the bank 2 exhaust lock solenoid medium
  • Open in a supply shared with other phaser solenoids low

Symptoms

  • Check engine lamp on
  • Uneven running between the banks

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P25D3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication