OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P25CD

Intake Camshaft Actuator Park Lock Control Circuit/Open (Bank 2)

P25CD is the bank 2 version of the open-circuit lock fault and therefore only appears on V or boxer engines whose second cylinder bank has its own intake phaser with a separately switched lock pin. The controller finds the lock solenoid circuit on that bank interrupted or electrically implausible, so it can no longer release or set the pin deliberately. If bank 1 is free of faults, comparing both banks' lock circuits with a multimeter quickly isolates the broken side. GM's 15OBDG01 OBD table lists P25CD in its intake phaser fault bundles even though the Volt engine it covers has a single bank, which shows these entries are shared software rather than an engine-specific description. Symptoms are uneven idle and lower power from the affected bank.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / CD

Possible causes

  • Open circuit inside the bank 2 lock solenoid high
  • Bank 2 lock solenoid connector unplugged or corroded medium
  • Wire break in the harness across the engine medium

Symptoms

  • Check engine lamp on
  • Uneven idle
  • Less power, bank 2 intake timing fixed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P25CD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication