Powertrain
generic / SAE
P25A8
Fuel Mode Select Switch Circuit Intermittent/Erratic
Fuel mode switch signal jumps or drops out — worn contact or vibration. Wiring faults of this kind typically come from chafing, water ingress at connector seals, or pin push-back — a wiggle test on the harness while the code is active often confirms the location.
SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / A8
Possible causes
- Worn switch contact high
- Connector with intermittent contact under vibration low
- Harness routed against vibrating component low
Inspection / repair
- Difficulty: medium
- DIY: possible
- Estimated cost: 60–350 €
- Estimated time: 0.3–1.5 h
- Component: fuel mode switch
- MIL / check engine light
Sources
References
sae:J2012