P25A5
Fuel Mode Select Switch Performance
P25A5 flags a performance problem with the fuel mode select switch. The circuit is electrically sound, yet the switch behaves in a way that cannot be genuine, such as a momentary button that appears to be held down for minutes or a press that never returns to rest. On GM's bi-fuel trucks the chosen mode is kept across key cycles and each press toggles the fuel, so a stuck contact would keep requesting changes; GM's material on the bi-fuel Impala of 2015 notes that the switch light flashes while a fuel transition is under way. No manufacturer documents P25A5 publicly. Likely culprits are spilt drinks in the centre stack, a cap jammed after trim work or a switch from the wrong variant. The driver may lose manual fuel selection while the engine runs on.
Possible causes
- Switch button sticking or contaminated by liquid high
- Panel trim pressing on the switch after installation work medium
- Replacement switch of the wrong type or coding low
Symptoms
- Fuel mode changes by itself or not at all
- Switch indicator keeps flashing
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P25A5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.