P25A3
Engine Hood Open
P25A3 is a state code, not a wiring fault: the hood is reported open at a moment when the control strategy expects it closed, for example while an automatic restart, a remote start or a hybrid engine pull-up is pending. No manufacturer documents P25A3 publicly. A Stellantis STAR case on hood switch 2 explains the background: the PCM reads that switch directly, cross-checks it against the latch switch state sent by the body module over CAN, and if either reads open it disables stop-start until the trip ends and blocks remote start. CARB's OBD rule cites an override of start-stop disablement as an emissions-neutral diagnostic. Circuit faults of the switch itself are P254F and P257D–P257F. A hood not fully latched or a misadjusted switch striker is the usual reason.
Possible causes
- Hood only on the safety catch, not fully latched high
- Hood switch or striker misadjusted after body work medium
- Latch-integrated switch sticking in the open position medium
Symptoms
- Hood open warning in the cluster
- Auto stop-start and remote start locked out
- Engine keeps running at standstill instead of stopping
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P25A3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.