P25A2
Brake System Control Module A Requested MIL Illumination
P25A2 is a messenger code: the brake system control module has stored an emission-relevant fault of its own and asks the engine module to light the check engine lamp. GM's 2017 engine table 17OBDG04 and 2019 hybrid table 19OBDG01 watch this request continuously from three seconds after power-up and class the engine module entry itself as Type A without a separate lamp request, because the lamp is already on the brake module's behalf. GM bulletins show the spread of causes: PIC6404 for 2020 Cadillac CT4 and CT5 links it to lost front camera communication, PIT6012 for 2023 Colorado and Canyon to a weak battery with C05D3 and a spongy pedal. Volvo's technical journal 36899 cures P25A268 on many 2017–2024 models by software. Read the brake module before replacing anything. Brake module B uses P25C9.
Possible causes
- Emission-relevant fault stored in the brake control module high
- Weak battery or low system voltage upsetting the brake module medium
- Brake or related module software needing an update medium
- Lost communication with a partner module such as the front camera low
Symptoms
- Check engine lamp on
- ABS, stability or driver assistance warnings at the same time
- Brake pedal may feel soft in some cases
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P25A2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.