P25A1
Turbocharger B Boost Control Position At High Limit
P25A1 is set when the boost control for turbocharger B is pinned at its upper limit and still cannot bring pressure down to the requested value, so the second charger overshoots. Like P25A0 it is limited to engines with two individually controlled chargers, and no manufacturer has published its own criteria for P25A1. CARB 13 CCR 1968.2 asks the OBD system to detect boost control that has exhausted its authority as well as boost that climbs above the commanded level. Ford's overboost monitor for turbocharger A (P259F) gives a sense of scale: 120 kPa above target for about 10 s on the 6.7 L diesel. A wastegate or vane mechanism stuck toward closed, a blocked or misrouted control line, or false sensor readings are typical. Engines usually limit power to protect the turbo.
Possible causes
- Wastegate or vanes of charger B stuck toward closed high
- Blocked, leaking or misrouted control line of actuator B medium
- Boost pressure sensor giving wrong values low
Symptoms
- Engine warning lamp on
- Power cut-out at high load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P25A1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.