P259A
Turbocharger Boost Control Position Sensor B Performance - Stuck Low
P259A applies to engines with a second boost control actuator, for instance a twin-turbo layout or the second stage of a two-stage system, whose position is read by sensor B. The code is stored when that actuator's reported position stays at the low end and stops tracking the command even though the signal is electrically sound. No manufacturer documents P259A publicly. Its logic mirrors P2598 on the A side, where Ford compares requested with actual position and reacts to more than 15 % for 25 s, and GM counts samples with vanes more open than requested. CARB 13 CCR 1968.2 requires the boost control system to report faults that stop it from reaching its target. P259B is the high-side counterpart; circuit faults of sensor B fall under P2586-P2590. Reduced power is the usual result.
Possible causes
- Sticking vanes, flap or wastegate on charger B high
- Weak vacuum or electrical supply to actuator B medium
- Worn actuator B or misadjusted linkage medium
Symptoms
- Engine warning lamp on
- Weak acceleration, notably in the range where charger B works
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P259A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.