P2597
Turbocharger Speed Sensor B Circuit Intermittent
P2597 records short interruptions or jumps in the signal of the second turbocharger speed sensor, between which the circuit works normally. Such faults usually sit in a connector, a wire that breaks contact under engine movement or heat soak, or a sensor that drops out when hot. No manufacturer documents P2597 publicly. As an analogy, Bentley's W12 bulletin for the same sensor stresses reproducing the customer's driving situation - load, gradient, speed, light and hard acceleration - before deciding on a repair, which is exactly what a sporadic fault demands. CARB requires electronic boost-control components to be monitored. Continuous electrical faults on sensor B are P2593, P2595 and P2596; P2582 is the same pattern on sensor A.
Possible causes
- Loose terminal or poor pin contact at sensor B high
- Wire breaking contact under engine movement or heat soak medium
- Speed sensor B dropping out when hot medium
Symptoms
- Occasional warning lamp, sometimes only after long drives
- Short power dips under load
- Dropouts in the speed trace of the second turbo
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2597
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.