P2593
Turbocharger Speed Sensor B Circuit
P2593 concerns the second turbocharger speed sensor, found where an engine has two turbochargers, for example one per cylinder bank. It marks an electrical fault on that sensor's circuit that is not further classified; the specific forms are P2595 (low), P2596 (high) and P2597 (intermittent), while P2594 covers a plausibility error. Sensor A is reported separately under P2578-P2582. No manufacturer documents P2593 itself publicly. Bentley's W12 engine carries two such sensors (G688 for bank 1, G689 for bank 2), both engine control units store their faults, and the bulletin prescribes testing for opens, shorts to ground or B+ and wire-to-wire shorts before a sensor is changed. CARB requires these boost-control parts to be monitored.
Possible causes
- Connector problem at speed sensor B high
- Harness to the second turbocharger damaged by heat or chafing medium
- Internal failure of speed sensor B medium
Symptoms
- Malfunction indicator lamp on
- Power reduced, often only slightly with one turbo affected
- No speed value for the second turbo in live data
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2593
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.