OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2592

Cruise Control Front Distance Range Sensor Right

P2592 marks a fault of the right-hand front distance sensor in multi-radar adaptive cruise layouts; the left unit reports P2591, a single or centre radar P2583. No maker publishes this code. Compared with a radar behind the grille emblem, a right corner sensor is more exposed to kerb and parking contact, stone chips and road salt reaching its connector, and it is often disturbed when a bumper is replaced on the passenger side. That is why aiming and mounting are checked before parts are swapped. Honda's P2583 bulletins illustrate the usual chain: dirt or ice on the radar face leads to a misalignment report and a temporary shutdown of the assistance. The engine module only keeps the record; the detailed cause is stored in the driver assistance or radar module. Driving itself is unaffected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / 92

Possible causes

  • Right sensor knocked out of alignment by kerb or parking contact high
  • Road salt or water corrosion at the right sensor connector medium
  • Sensor not recalibrated after bumper replacement medium
  • Right radar sensor internally faulty low

Symptoms

  • Adaptive cruise control switched off
  • Warning message for the radar or driver assistance system

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2592

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication