OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P258B

Vacuum Pump Control Circuit A Range/Performance

P258B is the range/performance code for control circuit A of the vacuum pump: the pump is commanded, but its monitoring feedback or the vacuum it produces does not fit. Ford's 2018-2019 hybrid OBD summary sets it from the brake module when the monitoring line sits outside 1.3-5.0 V with the relay off, or below 250 mV for 1 s with the relay on. FCA case S1805000006 for 2017-2020 Pacifica, Cherokee, Wrangler, Gladiator and Ram 1500 links P258B, often with ABS code C1252, to pumps that cannot keep enough vacuum and asks for checks of fuses, terminals, hoses and check valves plus a PCM update from 2019. Audi's Q3 bulletin 2072305 (2021-2024) traces P258B00 to a blown pump fuse after the ABS connector had been unplugged while the engine was running. The brake pedal may feel hard.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / 8B

Possible causes

  • Worn or failed electric vacuum pump high
  • Leaking hose or check valve that makes the pump run too long medium
  • Blown pump fuse, spread terminals or poor ground medium
  • Outdated engine software controlling pump duty cycle low

Symptoms

  • Engine, brake or stability warning lamp on
  • Hard brake pedal, less brake assist
  • Start-stop fault message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P258B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication