P2580
Turbocharger/Supercharger Speed Sensor A Circuit Low
P2580 says the signal from turbocharger or supercharger speed sensor A stays at the low end, so the engine computer sees too little or no usable pulse activity - typically from a short to ground, a weak sensor or a pickup that cannot read the target. A Stellantis STAR case from November 2023 for 2022-2024 Ram 2500 to 5500 trucks reports P2580 with the warning lamp, sometimes after few miles; besides the normal circuit tests it asks the technician to pull the sensor and inspect bore and tone wheel with a borescope, since debris or an extra O-ring left in the bore spoiled the signal. P2581 is the high-side counterpart, P2579 an implausible speed with a working circuit. Boost is often reduced.
Possible causes
- Debris on the tone wheel or an extra O-ring in the sensor bore high
- Signal wire shorted to ground medium
- Speed sensor A with weak or missing output medium
Symptoms
- Malfunction indicator lamp on
- Turbo speed reads zero or very low in live data
- Possible boost limitation and reduced power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2580
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.