P2575
Direct Ozone Reduction Catalyst Deterioration Sensor Circuit High
P2575 reports a deterioration-sensor signal above the valid range on a direct ozone reduction (DOR) catalyst - typical for an open circuit, a missing ground or a short to a supply voltage. No vehicle maker has published how it uses P2575, and no service bulletin naming it turned up in the NHTSA index. As an analogy, VW's 2014 CC book sends an open LIN line or a short to battery from the DOR radiator sensor to P2570. Because the DOR coating sits on the radiator, a radiator swap is the most likely moment for a connector to be left off or a wire to be damaged. P2574 covers the low side, P2576 brief dropouts. The engine runs normally; only emissions monitoring is affected.
Possible causes
- Connector left off or damaged during radiator work high
- Broken signal or ground wire medium
- Signal wire shorted to a supply voltage low
Symptoms
- Check engine light on
- No change in power or engine temperature
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2575
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.