P255E
PTO Speed Selector Sensor/Switch 2 Circuit Intermittent/Erratic
P255E concerns short dropouts or rapid changes on the PTO speed selector 2 signal that do not match deliberate operation. Selector 2 is often the remote control on the body, close to pumps, booms or spreaders, so vibration, spray water and cable movement hit it harder than an in-cab switch. Ram's 2012 chassis cab guide shows the effect of spurious transitions: in remote mode a quick off-on toggle advances to the next of up to five preset speeds, so a flickering contact can step the engine through speeds nobody asked for. No manufacturer publishes P255E. CARB expects such circuit faults to be monitored continuously. P255A would be a permanent open circuit; P254E is the same symptom on selector 1.
Possible causes
- Spray water or moisture in the body-mounted remote switch high
- Cable to the remote control flexing at a boom or hinge medium
- Loose crimp or terminal in the selector 2 circuit medium
Symptoms
- Engine steps through preset speeds unexpectedly
- PTO speed unstable while working
- Code appears only under vibration
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P255E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.