P2559
Engine Coolant Level Sensor/Switch Circuit High
P2559 is the high-voltage fault in the circuit of the coolant level sensor or switch. In the Deutz EMR L1 code list it appears as P2559-12 under SPN 111 meaning the line is shorted to battery plus; Deutz keeps open circuits under P2558 on that input, so a high reading there really points to contact with a positive feed. On other designs, especially simple float switches with a pull-up resistor, a broken wire could also produce a high level, so the maker's circuit logic decides what to measure. Wiring near the expansion tank often runs close to battery or fan feeds, which makes chafing a likely cause. P2558 covers the low side, P2557 an implausible but in-range value, P2556 the general circuit fault and P2560 a genuinely low coolant level. Until fixed, the low coolant warning may stay silent.
Possible causes
- Signal line chafed against a positive feed high
- Open circuit on pull-up type switch designs medium
- Level sensor internally faulty low
Symptoms
- Low coolant warning does not work
- Warning lamp or message for the level sensor
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2559
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.