OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2544

Torque Management Request Input Signal A

P2544 concerns torque requests that another module, usually the transmission control module, sends to the engine module – for example to cut torque during a shift. GM's 2020 table 20OBDG04 checks each TCM message for a wrong protection value (16 of 20), a broken rolling counter (6 of 10), an increase request above 1,298 Nm (6 of 10) or the request type toggling too often (3 of 5), type B with two trips. GM's 2012 bulletin PIC4740C for 2006–2013 Cadillac ATS, CTS, SRX and STS with six-speed automatics traces P2544 with many U-codes, hard shifts and no-crank to loose pins in the transmission X1 connector. A GM engineering bulletin on the 2019–2022 Malibu 1.5 L turbo names it next to lost-communication codes; Ford's BOSS 302S list of 2014 has it without a lamp mark. P2545 is the plausibility fault.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / 44

Possible causes

  • Loose or unseated pins at the transmission connector high
  • Data bus disturbance or failing gateway medium
  • Transmission module software or internal fault low

Symptoms

  • Check engine light, often with several U-codes
  • Harsh shifts or reduced engine power
  • Multiple warning lamps, possibly no-crank

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2544

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication