OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2540

Low Pressure Fuel System Sensor Circuit Range/Performance

P2540 checks whether the low-pressure fuel sensor's reading is credible. The signal stays inside its electrical window, yet the pressure it reports does not fit what the supply side should be delivering. In VW's 2014 Touareg specification book the code appears only in the chapter for engine code CGFA, which also carries the hybrid high-voltage faults; the criterion is a deviation of actual pressure, with limits given as 800 and 80 kPa. The chapter for engine code CGRA lists only P2539 and P2541. Ram counts P2540-00 among the faults addressed by a PCM reflash in bulletin 18-021-25 for the 2025 Ram 3500 with the 6.7 L Cummins HO, so software can be involved. Genuine causes are a weak supply pump or a clogged filter. P2539, P2541 and P2542 are circuit faults, P2543 dropouts. Hesitation or hard starts are possible.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number5 / 40

Possible causes

  • Weak in-tank or lift pump causing real pressure deviation high
  • Restricted fuel filter or kinked supply line medium
  • Low-pressure sensor reading offset medium
  • Outdated engine software (manufacturer update available) low

Symptoms

  • Check engine light
  • Hesitation or power loss under load
  • Long cranking or hard starting

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2540

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication