P2536
Ignition Switch Accessory Position Circuit
P2536 is the general fault of the accessory input, the signal that is live when the key or start button is in the accessory position and that on many vehicles also acts as a wake-up line between body and powertrain modules. The code does not say whether the line is open, low or high, only that its state cannot be used. No manufacturer documents P2536 publicly. The best analogue is P2537, which GM evaluates in engine and transmission modules; in bulletin PIT5308 GM explains that the ECM and TCM receive a 12 V accessory wake-up from the body module on circuit 5985. A faulty accessory line can disable functions that need modules awake with the engine off, such as remote start. Low and high levels are P2537 and P2538.
Possible causes
- Fault in the accessory feed or wake-up output of the body module medium
- Loose or corroded terminal on the accessory line medium
- Worn accessory contact in the ignition switch low
Symptoms
- Remote start or key-off functions not working
- Accessories behave inconsistently in the accessory position
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2536
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.