P252E
Engine Oil Quality Sensor Circuit Intermittent/Erratic
P252E points to an oil quality signal that briefly drops out or jumps while the circuit is otherwise intact. Typical sources are a terminal that loses contact when the engine shakes, a harness rubbing on the sump or a sensor whose internal measuring cycle is occasionally disturbed. Hella's oil sensors in the pan transmit their data as a repeating group of pulses roughly once per second, so on such designs even a single corrupted cycle can be detected. Hella's PULS+C extends the same sensor family to viscosity, density and permittivity. No vehicle maker documents P252E publicly. Unlike P252C and P252D the value is not stuck at one end, and unlike P252B the signal itself is unstable rather than merely implausible. Expect sporadic oil condition messages that come and go.
Possible causes
- Loose or corroded terminal in the sensor connector high
- Harness rubbing on the oil pan with intermittent contact medium
- Sensor electronics failing intermittently with heat or vibration low
Symptoms
- Oil condition message appears and disappears
- Fluctuating oil condition or service interval values
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P252E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.