P2524
A/C Request B Circuit High
P2524 indicates that A/C request input B reads above the level the engine module treats as valid. A line chafed against battery or ignition feed, an open pull-down inside the module or a control unit that latches its output high are the usual explanations. Ford is the one maker found to list it: its 2014 BOSS 302S code list shows P2524 without a lamp mark, just like its A-side counterpart P2521; no thresholds are given. A heavy-duty bulletin from Mack mentions a P252400 on MP10 engines, but in an oil pressure context, so that use is maker-specific and unrelated. CARB A/C monitoring applies only where the request alters fuel or spark control. P2523 is the low side, P2522 the general fault on B. Expect A/C behaving on its own.
Possible causes
- Input B wire shorted to battery or ignition voltage high
- Sending module output latched high medium
- Engine module input stage faulty low
Symptoms
- Compressor engages although not requested
- A/C cannot be switched off or on as expected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2524
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.