P2513
Event Data Recorder Request Circuit Low
P2513 is set when the event data recorder request line reads too low at the engine module. A wire rubbed through to body ground, a crushed harness after body work, or water in a floor connector are the obvious suspects; a low line may also be read as a permanent request. The recorder itself, usually housed in the airbag module, captures the seconds before and during a collision and depends on powertrain data for that picture. Ford is the only maker found listing P2513, in the 2014 BOSS 302S engine module table, marked W in the indicator column; thresholds are nowhere published. Unlike P2512 the circuit is not open but pulled down, and P2514 is the high side. Drivers notice nothing while driving; crash records may lack engine data.
Possible causes
- Request wire shorted to ground high
- Moisture or corrosion in an under-floor connector medium
- Recorder or engine module input stage faulty low
Symptoms
- Code stored without drivability effect
- Possibly a service or wrench indicator
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2513
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.